U.S. Motors – ASB841 Square Flange 1HP Full Rated 56Y 115/230V Pool and Spa Motor

Description

The U.S. Motors Emerson ASB841 Square Flange 1 HP Full Rated 56Y 115/230V Single Speed Pool and Spa Pump Motor is a powerfully designed replacement motor.

• Two compartments
• Shaft Threads 1/2-20 UNF-2A
• 50 degrees Celsius ambient
• 1081 Design
• Continuous Duty
• Switchless design
• Voltage selection device (dual voltage only)
• Service Factor: 1.65
• RPM: 3450
• Length without Shaft: 11.99
• 7.6-7.2/14.4A 208-230/115V

Installation Instructions:

• Ensure the pool motor is compatible with your pool pump.
• Turn pump power off during replacement.
• Check voltage requirements on your current setup.
• Always replace the mechanical pump seal. It’s recommended to replace all gaskets when replacing the motor.
• Turn on the pump to test for leaks and pump operation.
• Please reference additional installation instructions in owner’s manual in Guides and Documentation section below.
• Please Note: We recommend professional installation or the manufacturer warranty may be void. See Warranty section below.

Details

The U.S. Motors Emerson ASB841 Square Flange 1 HP Full Rated 56Y 115/230V Single Speed Pool and Spa Pump Motor is a powerfully designed replacement motor. Similar to spa and pool replacement motors, the Emerson 56 Y-Frame Motor is a two-compartment model with a voltage selection device, running at 1HP and 115/230V. Its large 6.5 frame boasts a stainless steel shaft for extremely durable housing and its thermally protected, Class B insulated design keeps the motor cool to prevent overheating. The Emerson 56 Y-Frame Square Flange is a single speed pool and spa motor and its 1 HP rating delivers optimum performance.

Please Note: When replacing the motor on the pump, replacing the mechanical pump seal is required to ensure proper installation. Pump seal size varies depending on the pump and not the motor.

Specifications